Prior to installing the Database Software (RDBMS) it is highly recommended to run the cluster verification
utility (CLUVFY) to verify that Grid Infrastructure has been properly installed and the cluster nodes have
been properly configured to support the Database Software installation. In order to achieve this CLUVFY
must be run in pre dbinst mode. The following outlines how to achieve this task:
cmd> runcluvfy stage -pre dbinst -n -verbose
cluvfy stage -pre dbinst -n OR-11,OR-12 -verbose > c:\temp\dbinst.txt
Performing pre-checks for database installation
Checking node reachability...
Check: Node reachability from node "OR-11"
Destination Node Reachable?
------------------------------------ ------------------------
OR-11 yes
OR-12 yes
Result: Node reachability check passed from node "OR-11"
Checking user equivalence...
Check: User equivalence for user "Inam"
Node Name Comment
------------------------------------ ------------------------
OR-12 passed
OR-11 passed
Result: User equivalence check passed for user "Inam"
Checking node connectivity...
Interface information for node "OR-12"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
public 192.168.26.12 192.168.26.0 On-link UNKNOWN 00:1A:A0:34:91:0A 1500
public 192.168.26.14 192.168.26.0 On-link UNKNOWN 00:1A:A0:34:91:0A 1500
public 192.168.26.66 192.168.26.0 On-link UNKNOWN 00:1A:A0:34:91:0A 1500
private 10.11.11.2 10.11.11.0 On-link UNKNOWN 00:1A:A0:34:91:0C 1500
Interface information for node "OR-11"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
public 192.168.26.11 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
public 192.168.26.13 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
public 192.168.26.64 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
public 192.168.26.65 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
private 10.11.11.1 10.11.11.0 On-link UNKNOWN 00:1D:09:0C:B4:CF 1500
Check: Node connectivity for interface "public"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
OR-12[192.168.26.12] OR-12[192.168.26.14] yes
OR-12[192.168.26.12] OR-12[192.168.26.66] yes
OR-12[192.168.26.12] OR-11[192.168.26.11] yes
OR-12[192.168.26.12] OR-11[192.168.26.13] yes
OR-12[192.168.26.12] OR-11[192.168.26.64] yes
OR-12[192.168.26.12] OR-11[192.168.26.65] yes
OR-12[192.168.26.14] OR-12[192.168.26.66] yes
OR-12[192.168.26.14] OR-11[192.168.26.11] yes
OR-12[192.168.26.14] OR-11[192.168.26.13] yes
OR-12[192.168.26.14] OR-11[192.168.26.64] yes
OR-12[192.168.26.14] OR-11[192.168.26.65] yes
OR-12[192.168.26.66] OR-11[192.168.26.11] yes
OR-12[192.168.26.66] OR-11[192.168.26.13] yes
OR-12[192.168.26.66] OR-11[192.168.26.64] yes
OR-12[192.168.26.66] OR-11[192.168.26.65] yes
OR-11[192.168.26.11] OR-11[192.168.26.13] yes
OR-11[192.168.26.11] OR-11[192.168.26.64] yes
OR-11[192.168.26.11] OR-11[192.168.26.65] yes
OR-11[192.168.26.13] OR-11[192.168.26.64] yes
OR-11[192.168.26.13] OR-11[192.168.26.65] yes
OR-11[192.168.26.64] OR-11[192.168.26.65] yes
Result: Node connectivity passed for interface "public"
Check: Node connectivity for interface "private"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
OR-12[10.11.11.2] OR-11[10.11.11.1] yes
Result: Node connectivity passed for interface "private"
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 15.9951GB (1.6772032E7KB) 922MB (944128.0KB) passed
OR-11 15.9951GB (1.6772032E7KB) 922MB (944128.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 13.7993GB (1.4469632E7KB) 50MB (51200.0KB) passed
OR-11 13.659GB (1.4322496E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 31.9883GB (3.3542216E7KB) 15.9951GB (1.6772032E7KB) passed
OR-11 31.9883GB (3.3542216E7KB) 15.9951GB (1.6772032E7KB) passed
Result: Swap space check passed
Check: Free disk space for "OR-12:C:\Windows\temp"
Path Node Name Mount point Available Required Comment
---------------- ------------ ------------ ------------ ------------ ------------
C:\Windows\temp OR-12 C 36.0027GB 500MB passed
Result: Free disk space check passed for "OR-12:C:\Windows\temp"
Check: Free disk space for "OR-11:C:\Windows\temp"
Path Node Name Mount point Available Required Comment
---------------- ------------ ------------ ------------ ------------ ------------
C:\Windows\temp OR-11 C 42.5386GB 500MB passed
Result: Free disk space check passed for "OR-11:C:\Windows\temp"
Check: System architecture
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 64-bit 64-bit passed
OR-11 64-bit 64-bit passed
Result: System architecture check passed
Checking length of value of environment variable "PATH"
Check: Length of value of environment variable "PATH"
Node Name Set? Maximum Length Actual Length Comment
---------------- ------------ ------------ ------------ ----------------
OR-12 yes 1023 359 passed
OR-11 yes 1023 368 passed
Result: Check for length of value of environment variable "PATH" passed.
Checking for Media Sensing status of TCP/IP
Node Name Enabled? Comment
------------ ------------------------ ------------------------
OR-12 no passed
OR-11 no passed
Result: Media Sensing status of TCP/IP check passed
Checking CRS integrity...
The Oracle Clusterware is healthy on node "OR-12"
The Oracle Clusterware is healthy on node "OR-11"
CRS integrity check passed
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
------------------------------------ ------------------------
OR-12 running
OR-11 running
Oracle Cluster Synchronization Services appear to be online.
Cluster manager integrity check passed
Checking node application existence...
Checking existence of VIP node application (required)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 yes yes passed
OR-11 yes yes passed
VIP node application check passed
Checking existence of NETWORK node application (required)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 yes yes passed
OR-11 yes yes passed
NETWORK node application check passed
Checking existence of GSD node application (optional)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 no no exists
OR-11 no no exists
GSD node application is offline on nodes "OR-12,OR-11"
Checking existence of ONS node application (optional)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 no yes passed
OR-11 no yes passed
ONS node application check passed
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
------------------------------------ ------------------------
OR-12 passed
OR-11 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
------------------------------------ ------------------------
OR-12 Observer
OR-11 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
Checking daemon liveness...
Check: Liveness for "W32Time"
Node Name Running?
------------------------------------ ------------------------
OR-12 yes
OR-11 yes
Result: Liveness check passed for "W32Time"
Check for NTP daemon or service alive passed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Check: Time zone consistency
Result: Time zone consistency check passed
Checking VIP configuration.
Checking VIP Subnet configuration.
Check for VIP Subnet configuration passed.
Checking VIP reachability
Checking for status of Automount feature
Node Name Enabled? Comment
------------ ------------------------ ------------------------
OR-12 yes passed
OR-11 yes passed
Result: Check for status of Automount feature passed
Pre-check for database installation was successful.
Choose Install database software only on the Select Installation Option screen and click Next to continue.
On the Grid Installation Options screen, choose Real Application Clusters database installation and select ALL nodes for the software installation. Click Next to continue.
Choose the appropriate language on the Select Product Languages screen and click Next to continue.
On the Select Database Edition screen choose Enterprise Edition and click Next to continue.
NOTE
If there is a need for specific database options to be installed or not installed, these options can be chosen by clicking the Select Options button.
Specify the location for Oracle Base (e.g. d:\app\oracle) and the database software installation (e.g.
d:\app\oracle\product\11.2.0\db_1) on the Specify Installation Location screen. Click Next to allow the OUI to perform the prerequisite checks on the target nodes.
NOTE
It is recommended that the same Oracle Base location is used for the database installation that was used for the Grid Infrastructure installation.
After the prerequisite checks have successfully completed, review the summary of the pending installation and click Finish to install the database software.
On the Finish screen click Close to exit the OUI.
utility (CLUVFY) to verify that Grid Infrastructure has been properly installed and the cluster nodes have
been properly configured to support the Database Software installation. In order to achieve this CLUVFY
must be run in pre dbinst mode. The following outlines how to achieve this task:
cmd> runcluvfy stage -pre dbinst -n -verbose
cluvfy stage -pre dbinst -n OR-11,OR-12 -verbose > c:\temp\dbinst.txt
Performing pre-checks for database installation
Checking node reachability...
Check: Node reachability from node "OR-11"
Destination Node Reachable?
------------------------------------ ------------------------
OR-11 yes
OR-12 yes
Result: Node reachability check passed from node "OR-11"
Checking user equivalence...
Check: User equivalence for user "Inam"
Node Name Comment
------------------------------------ ------------------------
OR-12 passed
OR-11 passed
Result: User equivalence check passed for user "Inam"
Checking node connectivity...
Interface information for node "OR-12"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
public 192.168.26.12 192.168.26.0 On-link UNKNOWN 00:1A:A0:34:91:0A 1500
public 192.168.26.14 192.168.26.0 On-link UNKNOWN 00:1A:A0:34:91:0A 1500
public 192.168.26.66 192.168.26.0 On-link UNKNOWN 00:1A:A0:34:91:0A 1500
private 10.11.11.2 10.11.11.0 On-link UNKNOWN 00:1A:A0:34:91:0C 1500
Interface information for node "OR-11"
Name IP Address Subnet Gateway Def. Gateway HW Address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
public 192.168.26.11 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
public 192.168.26.13 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
public 192.168.26.64 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
public 192.168.26.65 192.168.26.0 On-link UNKNOWN 00:1D:09:0C:B4:CD 1500
private 10.11.11.1 10.11.11.0 On-link UNKNOWN 00:1D:09:0C:B4:CF 1500
Check: Node connectivity for interface "public"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
OR-12[192.168.26.12] OR-12[192.168.26.14] yes
OR-12[192.168.26.12] OR-12[192.168.26.66] yes
OR-12[192.168.26.12] OR-11[192.168.26.11] yes
OR-12[192.168.26.12] OR-11[192.168.26.13] yes
OR-12[192.168.26.12] OR-11[192.168.26.64] yes
OR-12[192.168.26.12] OR-11[192.168.26.65] yes
OR-12[192.168.26.14] OR-12[192.168.26.66] yes
OR-12[192.168.26.14] OR-11[192.168.26.11] yes
OR-12[192.168.26.14] OR-11[192.168.26.13] yes
OR-12[192.168.26.14] OR-11[192.168.26.64] yes
OR-12[192.168.26.14] OR-11[192.168.26.65] yes
OR-12[192.168.26.66] OR-11[192.168.26.11] yes
OR-12[192.168.26.66] OR-11[192.168.26.13] yes
OR-12[192.168.26.66] OR-11[192.168.26.64] yes
OR-12[192.168.26.66] OR-11[192.168.26.65] yes
OR-11[192.168.26.11] OR-11[192.168.26.13] yes
OR-11[192.168.26.11] OR-11[192.168.26.64] yes
OR-11[192.168.26.11] OR-11[192.168.26.65] yes
OR-11[192.168.26.13] OR-11[192.168.26.64] yes
OR-11[192.168.26.13] OR-11[192.168.26.65] yes
OR-11[192.168.26.64] OR-11[192.168.26.65] yes
Result: Node connectivity passed for interface "public"
Check: Node connectivity for interface "private"
Source Destination Connected?
------------------------------ ------------------------------ ----------------
OR-12[10.11.11.2] OR-11[10.11.11.1] yes
Result: Node connectivity passed for interface "private"
Result: Node connectivity check passed
Check: Total memory
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 15.9951GB (1.6772032E7KB) 922MB (944128.0KB) passed
OR-11 15.9951GB (1.6772032E7KB) 922MB (944128.0KB) passed
Result: Total memory check passed
Check: Available memory
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 13.7993GB (1.4469632E7KB) 50MB (51200.0KB) passed
OR-11 13.659GB (1.4322496E7KB) 50MB (51200.0KB) passed
Result: Available memory check passed
Check: Swap space
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 31.9883GB (3.3542216E7KB) 15.9951GB (1.6772032E7KB) passed
OR-11 31.9883GB (3.3542216E7KB) 15.9951GB (1.6772032E7KB) passed
Result: Swap space check passed
Check: Free disk space for "OR-12:C:\Windows\temp"
Path Node Name Mount point Available Required Comment
---------------- ------------ ------------ ------------ ------------ ------------
C:\Windows\temp OR-12 C 36.0027GB 500MB passed
Result: Free disk space check passed for "OR-12:C:\Windows\temp"
Check: Free disk space for "OR-11:C:\Windows\temp"
Path Node Name Mount point Available Required Comment
---------------- ------------ ------------ ------------ ------------ ------------
C:\Windows\temp OR-11 C 42.5386GB 500MB passed
Result: Free disk space check passed for "OR-11:C:\Windows\temp"
Check: System architecture
Node Name Available Required Comment
------------ ------------------------ ------------------------ ----------
OR-12 64-bit 64-bit passed
OR-11 64-bit 64-bit passed
Result: System architecture check passed
Checking length of value of environment variable "PATH"
Check: Length of value of environment variable "PATH"
Node Name Set? Maximum Length Actual Length Comment
---------------- ------------ ------------ ------------ ----------------
OR-12 yes 1023 359 passed
OR-11 yes 1023 368 passed
Result: Check for length of value of environment variable "PATH" passed.
Checking for Media Sensing status of TCP/IP
Node Name Enabled? Comment
------------ ------------------------ ------------------------
OR-12 no passed
OR-11 no passed
Result: Media Sensing status of TCP/IP check passed
Checking CRS integrity...
The Oracle Clusterware is healthy on node "OR-12"
The Oracle Clusterware is healthy on node "OR-11"
CRS integrity check passed
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
------------------------------------ ------------------------
OR-12 running
OR-11 running
Oracle Cluster Synchronization Services appear to be online.
Cluster manager integrity check passed
Checking node application existence...
Checking existence of VIP node application (required)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 yes yes passed
OR-11 yes yes passed
VIP node application check passed
Checking existence of NETWORK node application (required)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 yes yes passed
OR-11 yes yes passed
NETWORK node application check passed
Checking existence of GSD node application (optional)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 no no exists
OR-11 no no exists
GSD node application is offline on nodes "OR-12,OR-11"
Checking existence of ONS node application (optional)
Node Name Required Running? Comment
------------ ------------------------ ------------------------ ----------
OR-12 no yes passed
OR-11 no yes passed
ONS node application check passed
Checking if Clusterware is installed on all nodes...
Check of Clusterware install passed
Checking if CTSS Resource is running on all nodes...
Check: CTSS Resource running on all nodes
Node Name Status
------------------------------------ ------------------------
OR-12 passed
OR-11 passed
Result: CTSS resource check passed
Querying CTSS for time offset on all nodes...
Result: Query of CTSS for time offset passed
Check CTSS state started...
Check: CTSS state
Node Name State
------------------------------------ ------------------------
OR-12 Observer
OR-11 Observer
CTSS is in Observer state. Switching over to clock synchronization checks using NTP
Starting Clock synchronization checks using Network Time Protocol(NTP)...
Checking daemon liveness...
Check: Liveness for "W32Time"
Node Name Running?
------------------------------------ ------------------------
OR-12 yes
OR-11 yes
Result: Liveness check passed for "W32Time"
Check for NTP daemon or service alive passed on all nodes
Result: Clock synchronization check using Network Time Protocol(NTP) passed
Oracle Cluster Time Synchronization Services check passed
Check: Time zone consistency
Result: Time zone consistency check passed
Checking VIP configuration.
Checking VIP Subnet configuration.
Check for VIP Subnet configuration passed.
Checking VIP reachability
Checking for status of Automount feature
Node Name Enabled? Comment
------------ ------------------------ ------------------------
OR-12 yes passed
OR-11 yes passed
Result: Check for status of Automount feature passed
Pre-check for database installation was successful.
- Start the OUI by running the setup.exe command as the Local Administrator user from the DB
directory of the Oracle Database 11g Release 2 (11.2.0.1) installation media and click next to begin
the installation process. - If using the DVD installation media (from edelivery.oracle.com) the first screen to appear will be the
Select a Product to Install screen. Choose Oracle Database 11g and click next to continue. If the OTN
media is used the RDBMS/ASM and Clusterware are separate downloads and the first screen to be
displayed will be Installation Type screen - The first OUI screen will prompt for an email address to allow you to be notified of security issues
and to enable Oracle Configuration Manager. If you wish NOT to be notified or not to use Oracle
Configuration Manager leave the email box blank and uncheck the check box. After entering the
desired information click Next to continue.
NOTE
If there is a need for specific database options to be installed or not installed, these options can be chosen by clicking the Select Options button.
d:\app\oracle\product\11.2.0\db_1) on the Specify Installation Location screen. Click Next to allow the OUI to perform the prerequisite checks on the target nodes.
NOTE
It is recommended that the same Oracle Base location is used for the database installation that was used for the Grid Infrastructure installation.
No comments:
Post a Comment